PRODUCT MANUAL iCOOK - DT.MP.IC.2201.2
7. USE
This section provides an overview of the basic functions and all the information necessary
for the correct use of the user interface of the Mychef iCOOK combi oven.
For a description of more specific functions, refer to the help available on each screen.
7.1. Switching on the equipment
The equipment is switched on or off using a switch located on the bottom rear.
Once turned on, the system can be turned off or on using the circular button START / STOP
on the control panel. Turning off from the circular button START / STOP the system will
remain in standby mode. To turn off completely it is necessary to use the switch.
In order to protect the oven from possible overheating, some protective
elements may work even if the oven is switched off. When the oven is at a
safe temperature, they will turn off automatically.
7.1.1. First use
Once you have connected your Mychef oven for the first time, you will need to access the
Wi-Fi network to synchronize with the cloud. A check on available software updates and if
necessary, the download and update of the system will then be executed.
After the software has been checked, the user interface will guide you through the "User
Mode" option for registering the oven, so that you can receive personalized assistance from
the Mychef service department.
In order to start using the oven, it will also be necessary for the installer to register, to check
the serial number, to verify the functionalities of the oven and to ensure that the installation
has been carried out correctly. To do this, the installer must select the "Installer Mode"
option and follow the steps marked by the user interface.
To Next Page
Loading...
