PRODUCT MANUAL iCOOK - DT.MP.IC.2201.2
The CookingPlanner mode has two different profiles from which you can choose:
- Multilevel: for cooking that starts at the same time, under a single cooking cycle and
different finishing times depending on the recipe of each tray. The system will notify
the user via the display and on the mobile device via a notification when each tray
must be removed at the end of cooking. Additional products can be loaded, cooking
stops when the door is opened. When the door closes, the process will resume.
Figure 23. Multilevel option
- JustInTime: for recipes that we want to be ready at the same time, notifying you when
to load the trays at different times. In this case, the system will notify when trays need
to be introduced based on cooking time to allow all food to be cooked at a particular
time. This cooking mode maintains the set temperature and humidity.
To Next Page
Loading...
