PRODUCT MANUAL iCOOK - DT.MP.IC.2201.2
During the execution of a washing program, it may be necessary to interrupt it due to an
emergency. In this case, pressing the circular button START/STOP will stop the program and
rinse to remove all detergent from the chamber.
Figure 34. Message after pressing the circular button START/STOP
If the cleaning process has been stopped without the cleaning process
being completed automatically, it is mandatory to remove all undissolved
pieces of detergent tablet from the chamber before proceeding with the
final rinse.
If any of the automatic cleaning processes are completed and you detect that there is any
detergent residue in the chamber (even behind the fan cover plate), perform a rinsing
program or perform a thorough manual rinsing of the cooking chamber.
If there is a power failure during the cleaning process, an error message will be displayed
on the control panel (error 26) when the oven is turned on again. In this case, and in order
To Next Page
Loading...
