PRODUCT MANUAL iCOOK - DT.MP.IC.2201.2
The right screen shows the maintenance plans, pressing the review buttons displays the
required activities to be performed.
The top bar shows the progress in operating hours associated with servicing. Once the
revision has been carried out, the date on which it was carried out will be indicated as shown
in the image above.
Check A:
- Water hardness testing
- Cleaning of cooling fans
- Electronic cleaning
- Cleaning of the drain tray
- Change of gasket and door adjustment
Check B:
- Temperature calibration
- Adjustment of the internal screws and bolts
Check C:
- Change of chimney pipes and drain pipes
- Change of solenoid valve for water injection
- Resistor contactor change
Check D:
- Engine change
- Change of resistance and seal
- Water injection pipe gasket replacement
To Next Page
Loading...
