Quick Start Guide
The scanner support 2 connections: Bluetooth mode, 2.4Ghz wireless mode .
When turn the scanner on for the first time, the scanner will enter into Bluetooth
pairing by default.
Connection mode indication:
When the light on the top of the scanner turns blue, it indicates the scanner is in
bluetooth mode.
When the light on the top of the scanner turns green, it indicates the scanner is in 2.4
GHz wireless mode.
It is suggested to use 2.4GHz wireless mode on the computer, use bluetooth mode on
the smartphone, tablets.
1. Bluetooth mode quick start guide
--To use the scanner on Android / iOS device
STEP1. Scan the following code “Bluetooth mode”to set the scanner to bluetooth
mode. The blue light is on and the red light is flashing, which means the scanner
enters into bluetooth pairing mode.
STEP2. Enable bluetooth function till find out“Scanner XXX”(XXX is the scanner id),
and click it to begin bluetooth pairing. Wait a few seconds, the red light will be off and
the blue light is still on, and the buzzer beeps twice , which means bluetooth pairing is
successful.
To Next Page
Loading...
