NADAMOO BF0022 - Troubleshooting

11
Troubleshooting (Bluetooth Mode)
Problem
Possible Reason
Solution
Power on the scanner,
the scanner has no
reaction. the buzzer does
not beep, the blue light
on the top of scanner
does not turn on, the red
scanning laser does not
show up
The battery run out
Recharge the scanner
The scanner can not hold
the charge
The PC’s USB port is
damaged
Using another USB port for
charging
The USB cable is damaged
Contact us for the
replacement
Power on the scanner,
the buzzer beeps, the
blue light on the top of
scanner will be on, the
red scanning laser does
not show up or become a
dot.
The laser head is damaged
Contact us for the
replacement
Scanner is in good
condition. But the
barcode can not be sent
to my phone/tablet
The scanner was set to
2.4Ghz wireless mode
Enable the bluetooth in
your device, and then scan
the code”
“bluetooth mode”
“instantly upload mode”
The scanner was set to
storage mode ， scanned
data will be kept in the
buffer of scanner
The bluetooth is disabled.