NANO D2 Series - Warranty Guidelines; Packaging

Page 5
1.3 Warranty Guidelines
All products are supplied with a 2 year manufacturer’s warranty from the date of purchase, when purchased with
or without an ES (Energy Saving) system when installed and maintained in accordance with the manufacturers
guidelines. Only genuine service parts should be used and no modicaons made. For further informaon please
contact nano-porous soluons.
1.4 Packaging
All dryers are securely packaged in a bespoke moulded packing system. The dryer module will be secured in a
horizontal posion using two specically moulded support cushions.
The support packing box permits limited longitudinal stacking; however the central secon of the
packing box should not be considered load bearing.
Damage to Packaging
• Check immediately to establish whether damage has occurred to the external packaging and if the damage
extends to the product inside.
• If there is damage to a product, contact the relevant supplier immediately.
In no circumstances must a damaged product be used in operaon. Using damaged products can lead
to irreparable funconal faults or cause serious physical harm.