Remote control 7-3
Setting COMMANDs
Syntax Function
ASBK
Aborts a sweep currently in progress
ASPA
Suspends a sweep currently in progress
ASRE
Resumes a sweep previously paused
S3PRC
Sets the PMM 7010 to conducted mode
S3PRR
Sets the PMM 7010 to radiated mode
SAAT a
Sets Attenuator for Analyzer Mode
SADT b
Sets the Detector for Analyzer Mode.
SAFF start,stop
Sets both Start and Stop frequency for Analyzer mode.
SAGO
Sets the 7010 in Analyzer mode
SAHT h
Sets Hold Time for Analyzer mode.
SAOP f
Sets the Stop frequency for Analyzer mode
SART f
Sets the Start frequency for Analyzer mode
SCFA n
Activates the conversion factor stored in the 7010
SCFE n, name Saves the conversion factor (made by SCFW).
SCFW n, freq; lev
Creates a conversion factor frequency by frequency.
SDMD a Switches the Demodulator On or OFF
SDMV v
Sets the volume of Demodulator
SLDW n, freq; levq, leva
Sets the custom double value limit frequency by frequency
SLIE name
Name the custom limit and making it active or deactivating it.
SLIM n
Sets the Margin to be used with Smart Detector function
SLIW n, freq; lev
Sets the custom limit frequency by frequency
SLSN n
Sets the input for Band B
SMAF f
Sets the tuning frequency for manual mode
SMAN
Sets the 7010 in manual mode
SMANP
Sets the 7010 in manual mode and sets the default value
SMAT a
Sets Attenuator for Manual Mode.
SMHT h
Sets Hold Time for manual mode
SRBW b
Sets RBW
SSFD
Sets parameters and triggers a sweep
SSFW n, freq
Creates a Frequency-Scan-Tab frequency by frequency
SSTP
Stops abruptly a running sweep in Analyzer mode
STAT b
Sets MinAtt
SUPP n
Outputs on the User Port bit by bit the argument n
To Next Page
Loading...
