National Instruments Compact FieldPoint cFP-20 Series User Manual

© National Instruments Corporation I-1 cFP-20xx and cFP-BP-x User Manual
Index
Numerics
100 Mbps LED, 3-4
10-position modular jack
pin descriptions (table), 3-8
pin locations (figure), 3-8
A
A LED, 3-4
Application Builder
Application Settings tab, 4-11
embedding LabVIEW VIs on cFP-20xx, 4-9
Installer Settings tab, 4-11
Source Files tab, 4-11
Target tab, 4-10
VI Settings tab, 4-11
applications, embedded. See embedded
applications on cFP-20xx
B
B LED, 3-4
C
C LED, 3-4
cables, Ethernet, 2-16, B-5
calibration certificate (NI resources), C-1
cFP-2020, 3-9, 3-10
compact flash, 3-11
cFP-20xx
connecting to network, 2-16
cFP-20xx hardware
configurable power-up states, 3-2
controller, 1-1
data communication methods, 5-3
DIP switches, 3-5
embedded applications. See embedded
applications on cFP-20xx
feature set, 3-1
figure, 1-2, 2-5, 2-13
hot swapping, 3-2
installation
mounting cFP-20xx in rack, 2-8
mounting cFP-20xx on panel, 2-6
limiting host access to LabVIEW RT
engine, 4-4
network watchdog, 3-1
overview, 1-1
power source, 3-10
powering, 2-16
powering up, 2-17
RS-232 serial port, 3-6
safety information, 2-2
setup overview, 1-3
snapshot feature, 3-2
specifications, B-1
targeting LabVIEW RT to cFP-20xx, 4-1
transferring files to and from cFP-20xx, 3-11
using with host PC software
DataSocket communication, 5-4
LabVIEW, 5-1
LabVIEW Publish Data VI, 5-5
LabVIEW serial VIs, 5-6
LabVIEW TCP and UDP VIs, 5-6
LabWindows/CVI, 5-1
OPC server, 5-2
overview, 5-1
cleaning cFP-20xx, 2-2
Compact FieldPoint system (definition), 1-2
configuration
connecting to field devices, 2-14
custom power-up configuration, 3-2

National Instruments Compact FieldPoint cFP-20 Series Specifications

General

Brand	National Instruments
Model	Compact FieldPoint cFP-20 Series
Category	Network Hardware
Language	English