Appendix A Specifications
© National Instruments Corporation A-5 DAQCard-700 User Manual
Humidity ................................................ 5 to 90% RH, noncondensing
Maximum altitude .................................. 2000 meters
Pollution degree (indoor use only)......... 2
Safety
The DAQCard-700 meets the requirements of the following standards for
safety and electrical equipment for measurement, control, and laboratory
use:
• EN 61010-1:1993/A2:1995, IEC 61010-1:1990/A2:1995
• UL 3111-1:1994
• CAN/CSA c22.2 no. 1010.1:1992/A2:1997
Electromagnetic Compatibility
CE, C-Tick, and FCC Part 15 (Class A) Compliant
Electrical emissions................................ EN 55011 Class A at 10 m
FCC Part 15A above 1 GHz
Electrical immunity................................ Evaluated to EN 61326:1997/
A1:1998, Table 1
Note
For full EMC compliance, you must operate this device with shielded cabling.
In addition, all covers and filler panels must be installed. Refer to the Declaration of
Conformity (DoC) for this product for any additional regulatory compliance information.
To obtain the DoC for this product, click Declaration of Conformity at
ni.com/hardref.nsf/
. This Web site lists the DoCs by product family. Select the
appropriate product family, followed by your product, and a link to the DoC appears
in Adobe Acrobat format. Click the Acrobat icon to download or read the DoC.
To Next Page
Loading...
Need help?
General
