20 | ni.com | NI myDAQ User Guide
Function Generator (FGEN)
The NI ELVISmx Function Generator (FGEN) generates standard waveforms with options for
the type of output waveform (sine, square, or triangle), amplitude selection, and frequency
settings. In addition, the instrument offers DC offset setting, frequency sweep capabilities, and
amplitude and frequency modulation. The FGEN uses AO 0 or AO 1 on the screw terminal
connector.
This instrument has the following measurement parameters:
• Output channel: AO 0 or AO 1
• Frequency range: 0.2 Hz to 20 kHz
Figure 14. NI ELVISmx Function Generator
To Next Page
Loading...