National Instruments PXIe-4302 User Manual

NI PXIe-4302/4303 and TB-4302/4302C | © National Instruments | 3
What You Need to Get Started
To set up and use a NI PXIe-4302/4303 module with a TB-4302/4302C terminal block, you need
the following items:
 Hardware
– NI PXIe-4302/4303 module
– TB-4302/4302C terminal block
– NI PXI Express chassis
– Cabling and sensors as required for your application
 Tools
– Number 1 and 2 Phillips-head screwdrivers
– 1/8 in. flathead screwdriver
– Long-nose pliers
– Wire cutter
– Wire insulation stripper
 Documentation
– Read Me First: Safety and Electromagnetic Compatibility
– NI PXIe-4302/4303 and TB-4302/4302C User Guide and Terminal Block
Specifications
– NI PXIe-4302/4303 User Manual
– NI PXI Express chassis user manual
You can download needed documents from
ni.com/manuals.
Installation
Install the Software
Note You must be an administrator to install NI software and devices on your
computer.
Ensure that the following software is installed before installing the NI PXIe-4302/4303 and
TB-4302/4302C hardware:
1. Your application software, such as LabVIEW, LabWindows
™
CVI
™
or .NET.
2. NI-DAQmx—NI PXIe-4302/4303 modules were first supported in NI-DAQmx 15.1.
Note For detailed NI software version support, refer to the NI-DAQmx Readme.
Back up any applications before upgrading software or modifying the application.

National Instruments PXIe-4302 Specifications

General

Brand	National Instruments
Model	PXIe-4302
Category	Control Unit
Language	English