The other major feature of the Exciter section is the feedback control. The main control
here is the orange feedback knob (
FB) that controls the amount. The EXT knob crossfades
between per voice feedback before the effects and monophonic feedback after the effect.
A TIMER knob to turn the feedback into a pulse and eliminate unwanted high frequencies
rounds out the controls.
Exciter Parameters
Fig. 5.7 Exciter section
▪
[1] IMPULSE: Level (dB) of the impulse signal in the Exciter signal. Please note that the
impulse is shaped by the Exciter Envelope. When the Attack time is increased it will be
damped.
▪
[2] NOISE: Level (dB) of the noise signal as part of the Exciter signal. The noise signal is
shaped by the Exciter Envelope and can be also modulated by the Mod Envelope and
the LFO.
▪
[3] FB: Amount of feedback signal mixed to the Exciter signal. Bipolar control for posi
tive and negative feedback.
▪
[4] EXT: Crossfades between the output of the polyphonic instrument and the (mono
phonic) output of the effects chain as a source for feedback.
▪
[5] TIMER: The feedback signal is converted to a pulse signal with adjustable minimum
pulse-width. This parameter crossfades between the original feedback signal and the
pulse-shaped signal.
Overview of REAKTOR PRISM Ensemble
Exciter Section
REAKTOR PRISM - Manual - 29
To Next Page
Loading...
Need help?
General
