Dantec Keypoint Focus
3
Copyright © 2019 Natus. All rights reserved.
The contents of this manual are the property of Natus. Any reproduction in whole or in part is
strictly prohibited.
At the time of printing / transfer to the DVD, this manual correctly described the device and
its functions. However, as modifications may have been carried out since the production of
this manual, the system package may contain one or more addenda to the manual. This
manual including any such addenda must be thoroughly read, before using the device.
The following situation voids any guarantee(s) and obligations for Natus:
- The device is not used according to the enclosed manuals and other accompanying
documentation.
This system is CE marked in conformity with the requirements in the Medical Device Directive
93/42/EEC.
Natus Neuro and Keypoint are registered trademarks of Natus Medical Incorporated in the
U.S. and in other countries.
Note that the documentation accompanying the Keypoint devices include a Software
Instructions for Use manual; a Hardware Instructions for Use manual; a Technical Data Sheet;
and a Clinical Reference Manual. Both the Software and Hardware Instructions for Use
manuals are necessary to be able to use the Keypoint.NET application and carry out a test.
For advanced use of the Keypoint.NET application, the Clinical Reference Manual (available in
English only) offers a description of all the functions and tests that can be performed. For
technical information, the Technical Data Sheet (available in English only) offers detailed
technical specifications.
Follow Instructions for Use / Attention to Warnings and Cautions
Before starting a test, make sure you read the documentation and fully understand how to
operate the system. Pay special attention to all Warnings and Cautions.
For the list of the general regulatory symbols associated with this device, see the General
Regulatory Symbols section in this manual.
To Next Page
Loading...
