Importer Plus Technical Instruction Manual Unpacking and installation
Issue 0.02 2010-03-29 Page 4-1
Section 4: Unpacking and installation
To install an Importer Plus, perform the following tasks:
1. Unpack the Importer Plus from shipping box. Make sure that all shipped items are available
- check your packing list.
2. Inspect all crates and packages for damage. Report any damage immediately to your Nautel
sales representative.
3. Assemble your parts and tools. For a list of required tools, see “Parts and tools” on page 3-1.
4. the Importer Plus at the studio or transmitter site in the cabinet space you have prepared.
5. Do not connect ac power to the Importer Plus at this time.
To Next Page
Loading...