Nautilus T616 User Manual

36
 ToexittheUserProleoptions,pushthePAUSE/STOPbuttonandtheconsolewillgobacktothePower-Up Mode
screen.
5. The Console display shows the NAME prompt and the current User Profile name.
Note: The User name will be blank if this is the first edit. The name of a User Profile is limited to 13 characters.
The currently active segment will flash. Use the Increase/Decrease buttons to move through the alphabet and blank
space(foundbetweenAandZ).Toseteachsegment,usetheLeft()orRight()buttonstoshiftbetweensegments.
Push the OK button to accept the displayed User name.
6. ToedittheotherUserdata(WEIGHT,HEIGHT,AGE,GENDER),usetheIncrease/Decreasebuttonstoadjust,and
push OK to set each entry.
Note: The User BMI is displayed on the HEIGHT prompt in the TIME display field.
The BMI Measurement is a useful tool that shows the relationship between weight and height that is associated with body
fat and health risk. The table below gives a general rating for the BMI score:
Underweight Below18.5
Normal 18.5–24.9
Overweight 25.0–29.9
Obesity 30.0 and above
Note: The rating may overestimate body fat in athletes and others who have a muscular build. It may also underestimate
body fat in older persons and others who have lost muscle mass.
Contact your doctor for more information about Body Mass Index (BMI) and the weight that is appropriate
for you. Use the values calculated or measured by the machine’s computer for reference purposes only.
7. The Console display shows the LAP DISTANCE prompt. This option controls the length of distance for a LAP during a
workout.UsetheIncrease/DecreasebuttonstoadjusttheLAPdistancevalue.Thedefaultis“0.25”miles(or0.4km).
Push the OK button to set the LAP distance value.
8. TheConsoledisplayshowstheSCANprompt.Thisoptioncontrolshowtheworkoutvaluesaredisplayedduringa
workout. The “ON” setting allows the Console to automatically display, or scan, between the workout values every 4
seconds. The “OFF” setting allows the user to push the RIGHT or LEFT buttons to view the other workout values when
desired.
The default is “ON”.
Push the OK button to set how the workout values are displayed.
9. The Console shows the workout display VALUE prompt. This option controls if a workout value is displayed during a
workout. The “ON” setting allows the Console to display the workout value, an “OFF” setting disables the workout value
during a workout.
TheConsoleflashestheactiveworkoutvalue(eitherTime,Lap(Time),Distance,Lap(Count),HeartRate,Calories,or
Pace)andstatesthecurrentsetting:“VALUE-ON”or“VALUE-OFF”.PushtheIncrease()orDecrease()buttons
to change the current setting, and push the Left()orRight()buttonstoshifttheactiveworkoutvalue.
Note: The Incline and Speed workout values cannot be disabled.
The default is “VALUE - ON” for all workout values. When done with modifying which workout values are displayed,
push the OK button to set the Console.
10. The Console display shows the WIRELESS HR prompt. If you are using the Console speakers at their higher settings
and / or using a larger sized personal electronic device, the Console may show Heart Rate interference. This option
allows the Telemetry Heart Rate Receiver to be deactivated blocking the interference.
The display shows the current value setting: “ON” or “OFF”. Push the Increase()orDecrease()buttonstochange

Nautilus T616 Specifications

General

Maximum speed	19.3 km/h
Number of programs	26
Maximum user weight	136 kg
Built-in display	Yes

Weight and Dimensions

Depth	1960 mm
Width	894 mm
Height	1463 mm
Weight	97500 g
Running area (W x L)	508 x 1524 mm