Why is the motor strained on my Nautilus Treadmill?
If the motor on your Nautilus Treadmill sounds strained, apply silicone lubrication to the inner surface of the walking belt. Refer to the belt lubrication procedure in this manual.
What to do if my Nautilus T616 Treadmill won't turn on?
First, ensure the treadmill is plugged into a working wall outlet by testing the outlet with another device. Check the power cord and connections for any damage, replacing them if necessary. Inspect the cable wires for crimps or cuts and replace the cable if damaged. Ensure the cable is securely connected and properly oriented, with the latch snapped into place. Examine the console display for cracks or damage, replacing the console if needed. If the console shows only a partial display and all connections are secure, consider replacing the console.
What to do if my Nautilus Treadmill belt stops moving?
If the belt on your Nautilus Treadmill stops moving during use: * Ensure the safety key is properly plugged into the console. * The unit may be overloaded. Lubricate the belt according to the maintenance schedule, check the belt tension, and restart the unit.
What to do if the belt stops moving on my Nautilus Treadmill while I'm using it?
First, make sure the Safety Key is properly plugged into the console. The unit might be overloaded, causing it to draw too much current and shut off to protect the motor. To resolve this, lubricate the belt according to the maintenance schedule, ensure the walking belt tension is correct, and then restart the unit.
Why does the walking belt slip on my Nautilus T616 Treadmill when I use it?
If you experience hesitation or the walking belt slips during use, adjust the belt tension at the rear of the machine.
What to do if my Nautilus Treadmill console shuts off while in use?
If your Nautilus Treadmill console shuts off during use, check the following: * Ensure the treadmill is plugged into a functioning wall outlet by testing the outlet with a known working device. * Inspect the connection at the front of the unit, ensuring it's secure and undamaged; replace if necessary. * Check the data cable for any damage; replace if wires are cut or crimped. * Confirm the data cable connections are secure and properly oriented. * Try resetting the machine by unplugging it from the electrical outlet for 3 minutes, then reconnecting it.
Why is 'Contact HR' not displayed on my Nautilus Treadmill?
Make sure your hands are centered on the HR sensors and remain still, applying relatively equal pressure to each side. Using a conductive electrode cream can improve contact.
What to do if the fan won't turn on or off on my Nautilus T616 Treadmill?
To resolve an issue where the fan on your Nautilus Treadmill won't turn on or off, unplug the unit from the electrical outlet for 5 minutes, then reconnect it.
How to fix a Nautilus T616 Treadmill that rocks or isn't level?
To fix a Nautilus Treadmill that rocks or isn't sitting level: * Adjust the levelers until the machine is stable. * If the surface is extremely uneven, the levelers may not compensate enough. Move the machine to a more level area.
Why is my Nautilus Treadmill making a thumping sound?
If your Nautilus Treadmill is making a thumping sound when the belt operates, it's likely that the walking belt needs to be used for a wear-in period. The sound should disappear after this period.
General| Maximum speed | 19.3 km/h |
|---|---|
| Number of programs | 26 |
| Maximum user weight | 136 kg |
| Built-in display | Yes |
Weight and Dimensions| Depth | 1960 mm |
|---|---|
| Width | 894 mm |
| Height | 1463 mm |
| Weight | 97500 g |
| Running area (W x L) | 508 x 1524 mm |
To Next Page
