*
*
**
**
26.Makesurethereissufcientspacetolowerthewalking
deck.
Keep a minimum clearance behind the machine of 2 m
(79”) and 0.6 m (24”) on each side. This is the recom-
mended safe distance for access, movement and
emergency dismounts from the machine.
27. Make sure there is no object on or around the treadmill to
spill or cause blockage from the fully unfolded position.
28. Slightly push the walking deck forward toward the console.
With your foot lightly push the top part of the hydraulic lift for-
ward until the locking tube releases and you can pull the walking
deck away from the console. Hold up the rear of the walking
deck, and move to the side of the machine.
Keep clear of the movement path of the walking deck.
29. The hydraulic lift is set up to drop gradually. Hold onto the
walking deck until approximately 2/3 of the movement down.
Make sure that you use proper lifting technique; bend your
knees and keep your back straight. Be aware that the walking
deck can possibly drop quickly in the last part of the movement
30. Re-install all remaining parts that were removed in reverse
order.
Note: when re-attaching the Console Backing, be sure to attach
thehardwaremarkedwiththe(*)rst,thenthehardwarewith
the ( ** ), followed by the remaining hardware.
Be sure to follow all warnings when rotating the Walking
Deck and lowering the Walking Deck.
31. Final Inspection
Inspect your machine to ensure that all hardware is tight and
components are properly assembled.
Do not use until the machine has been fully assembled
and inspected for correct performance in accordance
with the Owner’s Manual.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
