How to fix Nautilus U616 Exercise Bike continuously cycles through program screens?
To stop your Nautilus Exercise Bike console from continuously cycling through program screens, hold down the PAUSE/END button and the Left button together for 3 seconds.
Why is my Nautilus U616 displaying Telemetric HR incorrectly?
If your Nautilus Exercise Bike is displaying Telemetric HR incorrectly, ensure that the HR receiver is not blocked by a personal electronic device in the left side of the media tray.
What to do if my Nautilus U616 Exercise Bike is not displaying telemetric HR?
If your Nautilus Exercise Bike isn't displaying Telemetric HR, ensure the strap is POLAR® compatible and uncoded, directly against your skin, and the contact area is wet. If the strap has replaceable batteries, install new ones. Select the Edit User Profile option and ensure the WIRELESS HR setting is set to ON. Try moving the unit away from sources of interference like TVs or microwaves. If the HR still doesn't function, replace the strap.
What to do if my Nautilus U616 is not displaying contact HR?
If your Nautilus Exercise Bike is operating but not displaying Contact HR, ensure the cable is securely connected to the Console. Make sure your hands are centered on the HR sensors, kept still, and apply relatively equal pressure to each side. A conductive electrode cream can help improve contact. If these steps don't work, the Handlebars should be replaced.
Why does my Nautilus Exercise Bike say 'Please Pedal'?
If your Nautilus Exercise Bike console displays a 'Please Pedal' error, it indicates there's no speed/RPM reading. Check that all wires in the cable are intact and replace the cable if any are cut or crimped. Ensure the cable is securely connected and properly oriented, making sure the small latch on the connector lines up and snaps into place. Also, verify the magnet is in place on the pulley and that the speed sensor is aligned with the magnet and connected to the data cable. Realign the sensor if necessary, and replace it if damaged.
How to post workout results from Nautilus Trainer App to MyFitnessPal?
To post workout results from the Nautilus Trainer™ App to your MyFitnessPal® account or Under Armour® Connected Fitness, select the Sync to MyFitnessPal® or Under Armour® Connected Fitness option from the Menu icon on the Nautilus Trainer™ App.
How to sync Nautilus U616 workout results with Bluetooth device?
To sync your Nautilus Exercise Bike workout results with a Bluetooth® enabled device: * Ensure the machine is in Idle Mode to sync. Push the PAUSE/END button until the Power-Up Mode screen is displayed. * A workout must be longer than 1 minute to be saved and posted by the Console. * Unplug the unit from the electrical outlet for 5 minutes, then reconnect it. * Check your device to ensure that Bluetooth® is enabled. * Review the fitness app's specifications to confirm your device is compatible.
How to fix seat post movement on Nautilus U616 Exercise Bike?
To fix seat post movement on your Nautilus Exercise Bike: * Ensure the adjustment pin is locked into one of the seat post adjustment holes. * Make sure the knob is securely tightened.
How to stop a clicking sound when pedaling my Nautilus Exercise Bike?
To stop a clicking sound when pedaling your Nautilus Exercise Bike, remove the pedals. Ensure there is no debris on the threads, and then reinstall the pedals.
Why is the telemetric heart rate displayed incorrectly on my Nautilus U616 Exercise Bike?
If the telemetric heart rate is displayed incorrectly on your Nautilus Exercise Bike, ensure that the HR receiver is not blocked by a personal electronic device in the left side of the media tray.
Read and follow all warnings and instructions for safe operation and assembly.
Step-by-step instructions for attaching the front and rear stabilizers to the main frame.
Instructions for connecting the console mast and mast boot to the main assembly.
Guide for securely attaching the handlebars to the console mast.
Steps for mounting the console onto the console mast.
Instructions for inserting and securing the seat post into the frame.
Steps to correctly attach the seat to the seat post.
Instructions for attaching the left and right pedals to the crank arms.
Instructions for connecting the power adapter and performing a final check of the assembly.
Guide on how to adjust the levelers to ensure the bike is stable and balanced.
Important safety precautions and general maintenance advice for regular care of the machine.
Solutions for problems like no display, partial display, or contact HR not being displayed.
Troubleshooting steps for telemetric HR not displaying correctly or no speed/RPM readings.
Solutions for problems with resistance changes, fan operation, and unit leveling.
Troubleshooting for loose pedals, difficult pedaling, and crank arm connections.
Solutions for clicking sounds, console cycling through screens, and Bluetooth sync problems.
General| Type | Upright Exercise Bike |
|---|---|
| Resistance Levels | 25 |
| Display | LCD |
| Programs | 29 |
| Bluetooth Connectivity | Yes |
| User Profiles | 4 |
| Speakers | Yes |
| Resistance Type | Magnetic |
| Seat Type | Padded |
| Transport Wheels | Yes |
| Heart Rate Monitoring | Contact and Telemetry Enabled |
| Maximum User Weight | 300 lbs |
| Seat Adjustability | Vertical |
| Pedals | Standard |
To Next Page
