NCR PX10 POS 7746 - Page 62

Controlled Deployment
4-52 BIOS Setup
Configuration Choices
Configuration Choice
Settings
Notes
Physical Presence Spec
Version
[1.3]
TPM 20 InterfaceType [CRB]
Device Select [Auto]
► NCR POS
Hide Setup Items [Yes]
Port CF9 Full reset [Disabled]
ACPI S5 Shutdown [Enabled]
F8 BBS Boot Menu [Enabled]
Delay Before GOP
Initialization
0
Logo Display [Logo]
► HDD S.M.A.R.T. Status
SATA Port 0 32GB SATA Flas (32.0GB) Dependent on device
installed.
SMART Status Supported /OK
SATA Port1 Not Present
SMART Status N/A
► ACPI Settings
Enable ACPI Auto
Configuration
[Disabled]
Enable Hibernation [Enabled]
ACPI Sleep State [S3 (Suspend to RAM)]
Lock Legacy Resources [Disabled]
► SMART Settings
SMART Self Test [Disabled]
► Serial Port Console Redirection
Console Redirection [Disabled]
► AMT Configuration