NCR PX10 POS 7746 - Page 63

Controlled Deployment
BIOS Setup 4-53
Configuration Choices
Configuration Choice
Settings
Notes
Intel AMT [Disabled]
BIOS Hotkey Pressed [Disabled]
MEBx Selection Screen [Disabled]
Hide Un-Configure ME
Confirmation Prompt
[Disabled]
MEBx Debug Message
Output
[Disabled]
Un-Configure ME [Disabled]
Amt Wait Timer 0
ASF [Enabled]
Activate Remote Assistance
process
[Disabled]
USB Configure [Enabled]
PET Progress [Enabled]
AMT CIRA Timeout 0
WatchDog [Disabled]
. OS Timer 0
. BIOS Timer 0
►PCH-FW Configuration
ME Unconfig on RTC Clear
State
[Enabled]
ME State [Enabled]
fTPM Switch Selection [GPDMA Work-Around]
TPM Device Selection [dTPM 1.2]
► Firmware Update Configuration
Me FW Image Re-Flash [Disabled]
► IT 8785 Super IO Configuration
. ►Serial Port 1 Configuration
. Serial Port [Enabled]