NCR RealPOS 5976-1 Series - Chapter 7: Software Utility; Introduction

Chapter 7: Software Utility
Introduction
The RomFlasher.exe (Windows) / RomFlasher.rpm (Linux) is the software utility
used to update the display firmware and load additional character sets to the 5976
2x20 LCD Display. The software is composed of the following modules:
ROM Flasher Code Page Update
Flash Firmware

Flash Additional Code
Page


Replace Existing Code
Page


Generate Code Page


Set Brightness Level


Shift Firmware


Windows


Linux


Remarks
•
Manual firmware
flashing
• Manual firmware shift
•
Manual code page
generation and
flashing
The software supports flashing of firmware into the device connected through the
USB or RS–232 serial port.
Note: For more information about RomFlasher, refer to the
ReadMe.txt in the NCR
website,
http://www5.ncr.com/support/support_drivers_patches.asp?Class=External/PeripheralsLineD
isplay5976\display.
7