NCR RealPOS 5976-1 Series - Generating Code Page

Chapter 7: Software Utility 7-17
5. Select 5976. The NCR 5976 Support page displays.
6. From the Code Pages list, select the Code Page that you want to download.
7. Save the downloaded file (
*.dat file) to a working directory on the terminal hard
drive.
Note: The files can be extracted to and run from a Flash Drive, CDROM, or
network if desired.
Generating Code Page
The Code Page Utility includes a Code Page Generator application that converts a
2x20 Retail Display 7x9 dot matrix code set representation into the lowest level databit
representations that are used inside the 5976 firmware program. The code set is
specified to this program in the form of a text file which represents the 7x9 matrix for
each of the 256–member character set.
To generate a code page, perform the following steps:
1. Launch the 5976 2X20 ROM Flasher application by selecting from the Start menu
Start
All ProgramsNCRRomFlasher 5976RomFlasher.
The application displays the ROM Flasher user interface.
.