1 - 9
Note: The following USB “Plug and Play” codes (USB Keyboard - PC , USB
Keyboard - Mac, and USB HID) are for use with the 7837-1110-9090
model.
Scan one of the following codes to program the NCR RealScan 7837 High-Per-
formance Scanner for USB PC Keyboard or USB Macintosh Keyboard. Default
= USB Keyboard (PC).
Scan the following code to program the NCR RealScan 7837 High-Performance
Scanner for USB HID bar code scanners.
USB Converter
Note: The USB converter is for use with the 7837-1000-9090, 7837-1100-9090,
7837-1002-9090, and 7837-1102-9090 models only.
The 7837
-1000-9090,
7837
-1100-9090,
7837
-1002-9090, and
7837
-1102-9090
models use a USB converter to simulate a USB keyboard. Data flows into appli-
cations as if entered from the keyboard. The USB converter is compatible with
Apple iMac Series and Windows®98 and later PCs. Use cable set 1416-C783-
0025 to make the USB port connection.
To set up the USB communications, find the terminal ID in the Supported Termi-
nal Chart on page 2-3, and follow the instructions on page 2-2. The PC and
scanner automatically connect. Communications start immediately.
* USB Keyboard (PC)
USB Keyboard (Mac)
USB HID Bar Code Scanner
To Next Page
Loading...
