7 - 21
Telepen, continued
EXAMPLE:Decode only those bar codes with a count of 9-20 characters.
Min. length = 09 Max. length = 20
EXAMPLE:Decode only those bar codes with a count of 15 characters.
Min. length = 15 Max. length = 15
For a value other than the minimum and maximum message length defaults,
scan the bar codes below, then scan the 2-digit value and Save bar codes on the
Programming Chart inside the back cover. Minimum and Maximum
lengths = 1-60.
Note: If you make an error while scanning the digits (before scanning Save),
scan Discard on the back cover, scan the Minimum or Maximum bar
code, scan the correct digits, and Save again.
Minimum (Default =1)
Maximum (Default =60)
To Next Page
Loading...
