EasyManuals Logo

NEC Aspire Cordless II Product Description

NEC Aspire Cordless II
152 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #119 background imageLoading...
Page #119 background image
Section 3: Features
Product Description 113
3
- The VRS and play a VRS message to the caller.
- A Department Group pilot number
- A trunk Ring Group
Route According to DID Translation Table or Separate ANI/DNIS Routing Tables
ANI/DNIS Data Displayed as Caller ID Data
Data Error and Unanswered Call Handling
If a call can’t be completed, send it to a predetermined Ring Group or play supervisory tones
to the caller.
Tandem Trunking (Unsupervised Conference)
Description
Tandem Trunking allows an extension user to join two or more outside callers in a trunk-to-trunk
Conference. The extension user can then drop out of the call, leaving the trunks in an Unsupervised
Conference. The extension user that established the Conference is not part of the conversation. The
Conference continues until either outside party hangs up. In addition, the extension user that set up
the Conference can end the tandem call at any time.
The number of Conference calls is limited by the number of Conference circuits in the system. Due to
this fact, the maximum number of Conference calls cannot exceed the limits defined in the above table.
Tandem Trunking could help an office manager, for example, put two outside sales people in touch.
The office manager could:
Answer a call from one salesperson
Place a call to the second salesperson
Set up the trunk-to-trunk Conference
Drop out of the call
The office manager could terminate the Conference at any time.
There are two methods for Enhanced Tandem Trunking:
Method A - Set Up Without Transfer Key
An extension user can set up Tandem Trunking (Unsupervised Conference) by using the
CONF key. This option uses a uniquely programmed Transfer key to set up a tandem call.
Method B - Tandem Trunking on Hang Up
This method allows an extension user to easily set up an Unsupervised Conference with a call
they have placed on Hold. It uses a uniquely programmed Transfer key to set up a tandem call.
Aspire
NTCPU provides 2 blocks of 32 conference circuits, allowing each block to have any number of internal or external parties
conferenced up to the block’s limit of 32.

Table of Contents

Other manuals for NEC Aspire Cordless II

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NEC Aspire Cordless II and is the answer not in the manual?

NEC Aspire Cordless II Specifications

General IconGeneral
BrandNEC
ModelAspire Cordless II
CategoryTelephone
LanguageEnglish

Related product manuals