DS1000 02.10.09 Release Notes
New Features in 02.10.09
DS1000 Release Notes 9 ā 02.10.09
If you pressed VIEW to view your currently stored number, you see:
- Press SPK to exit the VIEW mode.
4. You see:
5. Select the Call Forwarding type:
- Dial 2 or press ALL to forward all calls.
- Dial 8 or press TRUNK ONLY to forward just trunk calls.
6. Once returning to idle, your telephone display will show:
- FWD OFP indicates that Off Premise Call Forwarding is enabled, followed by the number.
- If you selected a Speed Dial bin with a stored name, the name will display instead.
To cancel Call Forwarding Off Premise:
1. Press the ICM key and dial *3
OR
Press PROGRAM + CALL FWRD. You see: