Installing the Main Equipment Cabinet
DSX-80/160 Hardware Manual Installation ◆ 25
Installation
Hanging the Cabinet
To hang the cabinet:
1. Hang the Main Equipment Cabinet on the wall mount hanger(s) as shown:
- See Figure 6: Hanging the DSX-80 4-Slot KSU below when hanging a DSX-80 4-Slot KSU.
- See Figure 7: Hanging the DSX-160 8-Slot KSU below when hanging an DSX-160 slot cabinet.
2. Using the remaining screws packed with the hanger, secure the cabinet to the plywood backboard.
Figure 6: Hanging the DSX-80 4-Slot KSU
Figure 7: Hanging the DSX-160 8-Slot KSU
80000 - 60
Two hangers are provided
with the DSX-160 KSU.
To Next Page
Loading...
