Resetting and Initializing the System
DSX-80/160 Hardware Manual Installation ◆ 55
Installation
Initializing the System
To initialize (cold start) the system:
- This erases all your stored programming and returns the system to its default settings.
1. Turn off the system.
2. Press and hold the Reset Switch on the CPU while turning on the system power.
3. When all the LEDs on the CPU light and then go out, release the Reset Switch.
- The system will restart with the default settings.
Figure 40: Initializing the System
2, 3
1093096 - 42
To Next Page
Loading...
