External Paging
DSX-80/160 Hardware Manual Optional Equipment ◆ 61
Optional
Equipment
External Paging
Installing External Paging
The CPU provides an External Paging output. You connect the CPU Paging output to an audio input on a
customer provided Paging system. Be sure the connected Paging equipment is compatible with the following
page output specifications:
To connect to an External Paging Amplifier:
1. Obtain an audio cable that has a mono audio minijack (1/8”) on one end and a connector compatible with
the customer’s paging amplifier on the other.
2. Plug the mono audio minijack into the Audio Out connector on the CPU.
3. Plug the other end of the audio cable into the paging amplfier.
Figure 46: Connecting External Paging
External Paging Output Specifications
Output Impedance: 600 Ohms
Output Level: 0 dBr @ 1.0 kHz
1093096 - 26
To customer-provided
paging amplifier
Audio Cable
Audio Out
To Next Page
Loading...
