Music Source
62 ◆ Optional Equipment DSX-80/160 Hardware Manual
Music Source
Installing a Music Source
Your system provides two connections for customer provided music sources. Use these music sources for
Background Music and Music on Hold. Be sure the connected music sources are compatible with the follow-
ing music input specifications:
To connect a music source (two maximum):
1. Obtain an audio cable that has a mono audio minijack (1/8”) on one end and a connector compatible with
the customer’s music on the other.
2. Plug the mono audio minijack into one of the two Audio In connectors on the CPU.
3. Plug the other end of the audio cable into the music source.
Figure 47: Connecting a Music Source
Music Input Specifications
Input Impedance: 10K Ohms
Output Level: +18 dBr (+2 dBr) @ 1.0 KHz
1093096 - 27
To customer-provided
music sources
Audio Cable
Audio In 1
Audio In 2
To Next Page
Loading...
