DSX-80/160 Hardware Manual Optional Equipment ◆ 57
Optional
Equipment
Installing Optional
Equipment
Installing IntraMail
Installing IntraMail
Setting Up IntraMail for the First Time
To set up IntraMail:
1. Plug the IntraMail CompactFlash card into the CPU.
2. Reset the system. The IntraMail automatically installs.
- If updating from the Built-In Automated Attendant, just rerecord your Instruction Menu Messages.
Your Answer Schedule and Dial Action Table programing remain intact.
- By default, the first 16 (300-315) mailboxes are active/enabled and the IntraMail Automated Atten-
dant does not answer outside calls.
-
See Start-up IntraMail Programming in the front of the IntraMail section of the System Guide for more.
Figure 42: Installing IntraMail
■ A default system (with no voice mail installed) provides the Built-In Automated Attendant. See Automated Attendant,
Built-In in the IntraMail section of the System Guide for more.
■ If you have another (external) voice mail installed, you must disconnect and unprogram it before installing IntraMail.
10 9 3096 - 39