Installing Cards
DSX-80/160 Hardware Manual Installation ◆ 33
Installation
Installing 16SLIU and 8SLIU Analog Station Cards
The 16SLIU connects 16 analog telephones. The 8SLIU connects for 8 analog telephones.
To install a SLIU Card:
1. Turn to System Preparation (page 21) to be sure you haven’t exceeded the allowable system load factor.
2. Plug a SLIU Card into any available slot from CN2-CN8.
- You should reserve CN1 for a 16ESIU Card.
3. Set the mode switch on each installed SLIU Card to RUN
Figure 15: Installing a 16SLIU or 8SLIU Analog Station Card
1093096 - 43
DSX-80 4-Slot KSU Shown
To Next Page
Loading...
