Resetting and Initializing the System
54 ◆ Installation DSX-80/160 Hardware Manual
Resetting and Initializing the System
Resetting the System
To reset the system:
1. Briefly press (tap) the Reset Switch on the CPU.
Figure 39: Resetting the System
Important
If the system’s RS-232 connection uses twisted pair cable, before resetting do one of the following:
• Make sure the RS-232 cable is connected at both ends (i.e., PC and CPU).
• If the RS-232 cable is disconnected from the PC, be sure the cable is also disconnected from the CPU.
1
1093096 - 41
To Next Page
Loading...
