EasyManua.ls Logo

NEC DXE Series - Call Forwarding Options

NEC DXE Series
49 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
36
Alarm Clock
You may set an alarm as a one-off (type 1) or to be repeated every day (type 2). The
alarm will not work if the DECT is out of area when the set time comes. To stop the
audible alarm, press the Off/On-Hook key twice.
To set/cancel

Press the Off/On-Hook key

Dial 827 and the alarm clock type (1 or 2)

To set dial the alarm clock time in the 24 hour clock
OR to cancel the alarm clock dial 9999

Press the Off/On-Hook key to finish
Break In
If you ring an extension and it is busy it may be possible to break in to the call and all
parties will hear and be able to speak.
To b re a k in

The extension is busy

Dial 810
You are immediately into the call
Call Forward
You may wish to redirect your calls to another destination. There are different
conditions under which you can set a call forward, and one setup called tandem ring
allows a user to have two extensions that work as a single extension.
To set/cancel call forward

Press the Off/On-Hook key

Dial the call forwarding code as follows
842 for dual ring – calls ring at your own and the destination extension but not if
your phone is busy
843 for busy transfer – calls only forward when your phone is busy
844 for tandem ring – calls to either extension will ring both extensions or if
either is busy, busy tone shall be heard by the caller.
845 for unanswered call transfer – calls only forward on no reply at your phone
848 for call forward – all calls forward immediately to the destination extension

To set the call forward dial 1 and enter the destination extension number
Or to cancel dial 0

Press the Off/On-Hook key to finish

Other manuals for NEC DXE Series

Related product manuals