EasyManua.ls Logo

NEC DXE Series - Night Service; Paging

NEC DXE Series
49 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
41
Night Service
The system may be programmed with up to eight night modes to enable calls to be
routed differently. Certain users may be permitted to change the system manually
from one night service mode to another.
To change the mode

Press the Off/On-Hook key

Dial 818 and the Night Service Password

Dial the night service code (0-7)
Confirmation tone shall be heard
0 : Day mode 4 : Day-2 mode
1 : Night mode 5 : Night-2 mode
2 : Midnight mode 6 : Midnight mode
3 : Rest mode 7 : Rest-2 mode

Press the Off/On-Hook key to finish
Paging
You may need to make an announcement over the loudspeakers of idle key telephones
and/or external equipment. Key telephones may be programmed into internal paging
groups (DECT handsets cannot receive paging calls) so that an announcement is sent
simultaneously to the telephones in the group.
To page an Internal group

Press the Off/On-Hook key

Dial 801 and the paging group number (0 for all calls, 01-16)

Make the announcement

Press the Off/On-Hook key to finish
To page an External group

Press the Off/On-Hook key

Dial 801 and the paging group number (0 for all calls, 1-8)

Make the announcement

Press the Off/On-Hook key to finish

Other manuals for NEC DXE Series

Related product manuals