37
It is possible if the system is programmed, to allow the call forward condition to be
transferred to an external number - it must be stored as a common abbreviated dial.
To set external call forward
Press the Off/On-Hook key
Dial the all call forward code 848 and 1 to set
Dial 813 (access code for abbreviated dial) and the target abdial code
Press the Off/On-Hook key to finish
To cancel external call forward
Press the Off/On-Hook key
Dial 848 and 0 to cancel
Press the Off/On-Hook key to finish
Call Pickup
You may wish to intercept a call ringing at another extension, this is referred to as
pickup. You may enter a code to pickup a specific ringing extension or you may be
programmed into a pickup group and will pick up calls just for your group.
To pick up a call
Press the Off/On-Hook key and dial
867 for an extension within your pickup group or
715 and the extension number for a specific extension
You will intercept and be connected to the call.
Callback/Camp On
If the extension you dial is busy or does not reply, you may set up a callback so that
you are alerted as soon as they become available or once that extension is next used.
To set the Callback/Camp On
Dial 850 and listen for confirmation tone
Press the Off/On-Hook key
When you hear the recall tone alerting you that the extension is available
Press the Off/On-Hook key to finish
To Next Page
Loading...
