6
BATTERY INFORMATION
Fitting the Battery Pack and Charger
1. Push the back cover of DECT Handset upwards and insert the battery pack.
2. Make sure the battery contacts correctly positioned.
(Check battery polarity)
3. Replace the back cover correctly.
4. Connect the AC-DC Adapter plug to the socket on the left side of Handset Holder.
5. Put the AC-DC Adapter into the commercial AC socket.
6. Place the DECT Handset onto the Handset Holder. The battery will automatically
start charging.
Slide
Push
Slide
Handset Holder
(Left side view)
AC-DC Adapter
To Next Page
Loading...
