EasyManuals Logo

NEC DXE Series User Manual

NEC DXE Series
49 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
7
Charging & Operating Time
Charge the battery for 6-7 hours before using the DECT Handset for the first time.
This safety precaution extends the lifetime of your battery. The maximum
performance of the battery is only reached after 3 to 5 charging / discharging cycles.
Place the DECT Handset in the Holder regularly, in order to reach the optimum
battery charge.
Charging Time (to full capacity) 6-7 hours
Call Time (fully charged) up to 8 hours
Standby Time (fully charged) up to 80 hours
The charge level of the battery shall be indicated by the in the Display.
The symbol has the following meaning.
75-100% charged
50-75% charged
25-50% charged
0-25% charged
(Frame flashes) nearly discharged
Note : When the battery has been replaced, there is no charge level display until a
whole charge and discharge cycle has been completed.
When the battery capacity is nearly exhausted, you may hear 3 short beep tone
repeated once a minute as a warning. If you are making a call at the time, you may
still have up to 5 minutes of call time before the handset switches itself off.

Other manuals for NEC DXE Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NEC DXE Series and is the answer not in the manual?

NEC DXE Series Specifications

General IconGeneral
BrandNEC
ModelDXE Series
CategoryTelephone
LanguageEnglish

Related product manuals