46
Note : If less than 10 groups are available, only 1 digit Group No. shall be entered at
Step-2.
To place an outgoing call by using Trunk Group Routing :
Press Off/On-Hook Key.
Dial 9 ( ) [Trunk Group Routing Code].
Confirm the Dial Tone then dial the desired telephone
number.
To place an outgoing call by using Individual Trunk Group Routing :
Press Off/On-Hook Key.
Dial the Individual Trunk Group Routing code.
Confirm the Dial Tone then dial the desired telephone number.
To place an outgoing call by using F-Route Service :
Press Off/On-Hook Key.
Dial F-Route Number.
To place an outgoing call by using Multi-Carrier Indirect Access (LCR) Service :
Place an outgoing call. (The system shall automatically use LCR service.)
Trunk Outgoing Call via Interconnection Line :
Press Off/On-Hook Key.
Dial 866 ( ) and Network ID No. (1-8).
To set the Trunk Port Disable :
Press Off/On-Hook Key.
Dial 745 ( ).
Dial disabling trunk port number. (01-52)
Dial 1 to set.
Press Off/On-Hook Key to finish.
To release the Trunk Port Disable :
Press Off/On-Hook Key.
Dial 745 ( ).
Dial disabled trunk port number. (01-52)
Dial 0 to release.
Press Off/On-Hook Key to finish.
To Next Page
Loading...
