EasyManua.ls Logo

NEC Electra Elite IPK - ACD;UCD Operations; Log On; Log Off ACD;UCD; Break Mode Management; Answering Calls with a Headset

NEC Electra Elite IPK
58 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MEGACO Station Document Revision 4
Hardware, Installation and Maintenance Manual A - 3
___________________________________________________________________________________
___________________________________________________________________________________
Host Name: (Default Value: neciad)
Enter the Computer Name for the IAD(8)-U( ) ETU. The IAD(8)-U( ) ETU is displayed as
a computer on the IP network.
When naming the host machine, the host name may contain only alpha characters,
numeric digits, and a dash. (A space and/or special characters are not allowed in the
host name field).
IP Address: (Default value: 192.168.1.100)
This is the static IP address that is needed for the configuration. If used in a DHCP
environment where a DHCP server on the LAN automatically allocates the IP address,
make sure that the IP address is marked as RESERVED on the DHCP server.
Default Gateway: (Default value: 192.168.1.1)
Enter the default gateway address for the IAD(8)-U( ) ETU in this field.
Figure A-2 Setting IP Parameters

Other manuals for NEC Electra Elite IPK

Related product manuals