NEC Electra Elite IPK - Appendix E Electra Elite IPK IAD(8)-U( ) ETU Installation; Introduction; Installing IAD (8)-U( ) ETU Package; Description

Hardware, Installation and Maintenance Manual E - 1
___________________________________________________________________________________
___________________________________________________________________________________
Appendix E Electra Elite IPK IAD(8)-U( ) ETU
Installation
SECTION 1INTRODUCTION
The IAD (8)-U( ) ETU provides the hardware platform for providing Voice Over IP
connectivity for the KTS. By default, this card is shipped from NEC with a "platform
support" (factory default) firmware. A functional firmware is loaded as part of the
installation to support the desired VoIP functionality (for example, IP Megaco Station
package).
In this document, loading of a Megaco Station Card package on to the IAD(8)-U( )
ETU is provided. The same procedure applies for any other application package.
For the latest functional firmware, you may order a new Electra Elite IPK: IP Solutions
CD-Rom (NEC Part No. 750454) from NEC. Alternatively, you will find the latest IAD
packages on NEC support website at www.cng.nec.com.
 Access to this website requires technician login privileges.
SECTION 2INSTALLING IAD (8)-U( ) ETU PACKAGE
2.1 Description
The IAD (8)-U( ) ETU is and optional interface for the Electra Elite IPK KSU
that is used as integration device. The IAD (8)-U( ) ETU will support various
IP applications (e.g., IP CCH ETU application and Megaco Station
application).
Refer to Figure E-1 IAD (8)-U( ) ETU.