NEC Electra Elite IPK - Feature Access Keys; Station Speed Dial Programming via Feature Access Keys; DSS;BLF and Feature Access Programming

A - 6 Setup and Configuration
___________________________________________________________________________________
___________________________________________________________________________________
Document Revision 4 MEGACO Station
SECTION 3PORT SETTINGS
Using this screen, the voice over IP parameters can be set per port.
Port Number
This identifies the port number and active status.
Encoding Preferences: (Default: G.711 mu-law)
Select the preferred encoding protocol (codec) for making outgoing calls.
Packet Size (ms): (Default: 20 ms)
Use this field to select the preferred packet size.
Figure A-3 Port Setting Parameters