NEC Electra Elite IPK - AUTHORIZATION CODE FORCED;VERIFIED; Using Authorization Codes; DISA PASSWORD; Setting Your DISA Password

A - 2 Setup and Configuration
___________________________________________________________________________________
___________________________________________________________________________________
Document Revision 4 MEGACO Station
1. Start your Internet Explorer from a PC that is connected to the same network as
the IAD(8)-U( ) ETU.
2. The IAD(8)-U( ) ETU default IP Address 192.168.1.100.
3. Enter the default IP Address in the address link of your browser.
4. When the login screen appears enter the Login ID and password.
5. Click OK.
K Default Login ID = admin
K Default Password = password
 If the login fails due to incorrect user name or password, the login name is
presented again.
SECTION 2CARD CONFIGURATION PROGRAM MENUS
This screen allows the user to set IP parameters for the IAD(8)-U( ) ETU (Megaco Station
Card) and other parameters that commonly apply for the operation of the
IAD(8)-U()ETU.