CRU Replacement and Server Upgrades 4-35
10. Secure the PCI board retaining bracket to the expansion slot frame with the
setscrew removed in step 5. See Figure 4-45.
Figure 4-45. Securing the PCI Board Retaining Bracket
11. Reinstall the top cover of the PCI module and ensure that its hooks mate
with the tab slots of the PCI module chassis. Then slide the cover towards
the front of the PCI module chassis until its hooks are fully engaged in the
chassis. See Figure 4-46.
Figure 4-46. Installing the PCI Module Top Cover
12. Secure the top cover of the PCI module with the two screws removed from
the rear of the module in step 2.
13. Go to Installing a PCI Module later in this chapter.
To Next Page
Loading...
