NEC Express5800 320La - Monitoring Configuration Submenu; PCI Device Submenu

Configuring Your System 3-9
Monitoring Configuration Submenu
Feature
Choices or
Display Only Description Your Setting
Option ROM Scan
Monitoring
Disabled
Enabled
Disables and enables the Option
ROM Scan Monitoring Feature.
Option ROM
Monitoring Time-
out*
5 (1 to 20)
Boot Monitoring
Disabled
Enabled
Disable or enable the boot
monitoring feature. Set to disabled
when installing OS. Once OS is
installed, re-enable.
Boot Monitoring
Time-out Period*
5 (1 to 20)
POST PAUSE
Monitoring
Disabled
Enabled
Disables and enables the POST
Pause Monitoring Feature.
POST Pause
Monitoring
Time-Out*
3 (1 to 20)
Selects the time-out value of the
POST Pause Monitoring Feature.
*This feature is displayed only when POST Pause Monitoring is Enabled.
PCI Device Submenu
Feature
Choices or
Display Only Description Your Setting
PCI Slot: 1
—
PCI Slot: 4
On Board SCSI:
Disabled
Auto Select
IRQ3
IRQ4
IRQ7
IRQ9
IRQ10
IRQ15
PCI devices use hardware
interrupts called IRQs. A PCI
device cannot use IRQs already in
use by ISA devices, use "Auto"
only if no ISA legacy cards are
installed.
On Board LAN: IRQ5 (Display Only). Shows interrupt
assigned to on-board LAN.