A-2 Technical Specifications
This appendix provides the technical specifications for your server unit.
Server Unit
Table A-1 lists the server unit technical specifications.
Table A-1. Server Unit Technical Specifications
Item Specification
Chassis
Dimensions Tower-Based System:
Width: 14.0 inches (350 mm)
Height: 21.0 inches (525 mm)
Depth: 27.8 inches (694 mm)
Rack-Mount System:
Width: 19.3 inches (483 mm)
Height: 14.0 inches (350 mm)
Depth: 27.8 inches (694 mm)
Weight Maximum 114 lbs. (52 kg)
Enclosure Tower or 19-inch rack mountable (8U)
Environment Temperature: 50° to 95°F (10° to 35°C)
Internal rack ambient temperature should not exceed 25°C
Relative humidity: 20% to 80% (no condensation)
Peripheral Interface (rear access)
Peripheral interface (front access)
Two USB (4-pin) port connectors for keyboard and mouse
Two serial (9-pin) port connectors
SVGA (15-pin) port connector
RJ-45 T/10Base-T/100Base Ethernet port connector
Option PCI Slots per I/O Module Four 32-bit/33 MHz PCI bus slots
(Slot 1 is reserved for graphics card or SMM card)
Storage Device Capacity One IDE 24X CD-ROM drive
One 3 1/2-inch IDE high-capacity (120 MB) super (floppy) disk drive
One standard SCSI hard disk drive bay for mounting up to six hot-
pluggable 3 1/2-inch SCSI hard disk drives (two logical groups of three
disks)
CPU Module
Processor (up to two per module) Intel
®
Pentium
®
III Processor
Clock rate: 800 MHz
Cache: 256 KB
Optional Processor Support Upgradeable from one to two processors
To Next Page
Loading...
