4-46 CRU Replacement and Server Upgrades
A
B
A
Device module
B
Screws
Figure 4-56. Removing the Device Module
6. To reinstall the device module in the cabinet carefully insert the module into
its slot in the front panel of the cabinet.
7. Secure the device module to the front panel with the two screws removed in
step 4 above.
8. Plug in the power cords and power on the system.
9. Close and lock the front door on the tower cabinet or front covers on the
rack-mount system. See Opening and Closing the Front Door of the Tower
Cabinet earlier in this chapter or Removing and Installing the Front Covers
of the Rack-Mount System earlier in this chapter.
To Next Page
Loading...
