CRU Replacement and Server Upgrades 4-55
3. Using the two screws, secure the cooling fan and finger guard together. See
Figure 4-67.
A
B
C
A
Fan
B
Finger guard
C
Screws (2)
Figure 4-67. Mounting the Cooling Fan and Finger Guard
4. Connect the fan cable to the fan cable connector on the device DC power
distribution cable. See Figure 4-68.
NOTE: Check the orientation of the cooling fan using the
fan cable position.
Fan Cable
Figure 4-68. Connecting the Cooling Fan Cable
To Next Page
Loading...
