4-64 CRU Replacement and Server Upgrades
13. Connect the power cable (A) and interface cable (B) to the 5.25-inch tape
drive. The middle connector of the internal SCSI interface cable connects to
a 5.25-inch tape drive See Figure 4-80 and Figure 4-81.
B
A
Power cable
B
Interface cable (middle connector)
Figure 4-80. Connecting the Power and Interface Cables to a 5.25-inch Tape Drive
Tape
Drive
Tape
Drive
Front Panel
Rear Panel
Figure 4-81. Internal Interface Cable Connections - Top View
14. Mount the front door and top cover removed in Step 1 above. DO NOT
install the two knurled screws that secure the rear cable cover of the top
cover to the chassis at this time. See Figure 4-63.
To Next Page
Loading...
